Why Sparkle Glass Splashbacks Are The Best Option For Your Kitchen?

Sparkle glass splashbacks are the answer to your kitchen aesthetics. To add a vibrant look, you can consider sparkle splashback for kitchen. Sparkle splashback comes in various colors and designs.

You can select the ones matching your kitchen décor. Sparkle splashback is available in multiple options including gold, silver and rainbow.

Glitter sparkle glass splashbacks in Melbourne enhance your kitchen’s look as they shine under the lights. They go along well with traditional as well as LED lights.

Advantages Of Using Toughened Glass For Sparkle Glass Splashbacks

Toughened glass is highly durable and heat resistant. They are the ideal choice to install behind your heat stove. It protects your wall from water, grease and oil splashes.

Also, because of its non-porous nature, it won’t allow any bacteria to seep in.

Also, as the base material is made of glass, sparkle splashback is very hygienic. These splashbacks are easy to clean and wipe with a cloth.

Their low maintenance makes them attractive buy for your kitchen. Glass kitchen, in comparison to traditional models looks more aesthetic. It gives a complete make over to your boring interiors. Want to know about how much splashback cost. Well, you can find plenty of reasons to buy them. Though they are slightly expensive than titles, but their long life makes them cost effective in the long run.

How To Install Glass Splashbacks?

Here are 5 steps to install glass splashbacks in Melbourne

Prepare the surface

Carefully examine your kitchen wall for any cracks or uneven surface. Also, see if the level is uniform and the surface is dry.

It’s recommended to give your wall a clean. Make sure all the dust is removed before putting on the glass.

Measure the surface

You won’t like a titled splashback. That where the initial preparation comes into play. Carefully measure the length of the wall and locate the middle. Centered splashback will look more aesthetic.

Carefully apply silicon sealant

First put a masking tape on the wall before applying the sealant. This would prevent any sealant to stick outside the boundaries. Use a transparent silicon sealant as it will merge with the wall and won’t ruin the look.

Firstly, apply the sealant on the wall at the marked area and then put it on the glass splashback boundaries.

Put the glass correctly

Start from bottom onwards. Match the bottom of your splashback with the sealant line you have marked on the wall. Make sure that the glass perfectly fits the marks.

Then slowly push the glass upwards and press it firmly against the wall.

Wait till the silicon dries up

Leave the splashback to dry for at-least 24 hours to let the sealant stick perfectly. This will ensure that the sealant dries up and the splashback is secured.

Features of sparkle glass splashbacks

In the sparkle section installers have multiple colors available for glitter glass splashbacks in Melbourne. They are made using 6mm toughened glass which adds durability and strength.

They can bear sever impacts and can withstand temperatures up to 400°C. It’s easy to maintain them. You can use any chemical to clean the surface.